All Posts (5)

Sort by

Imagine you’re driving along your favorite country road when your unsuspecting windshield is assaulted by a stray pebble.  Your windshield is left with a pesky stone chip etched in its glass. This scenario is a common one, with an often-simple solution, windshield repair.  Depending on the type of damage and the extent of the damage incurred, windshield repair may be a cost saving solution to total repair.

31040792901?profile=originalUnderstanding Damage Types

There are generally two types of damage created by debris on the road, rock chips or cracks.  Rock chips are generally small shatters created by the impact of various types of road debris.  A crack in the windshield is a different kind of damage consisting of a prominent line of separation.  This generally stems from the point of impact.

Understanding the Specifics of Rock Chips

Rock chips can be categorized into four separate categories based upon the manifestation of the shatter.  Rock chips dubbed the bulls eye or partial bulls eye is characterized by a damaged area surrounded by a separate circular layer of glass.  It gives the appearance of a bulls eye as the outer area is darker surrounded by the middle point of impact.  This is the type of rock chip most frequently seen by service centers.  It can be easily repaired providing the chip does not exceed a diameter larger than one inch.  Another type of chip is the star chip which manifests as multiple legs coming out from the center of the point of impact.  This chip can be repaired if the entirety of the damage is no more than 3 inches.  Other possible chips include the combination chip which derives its name from its multiple characteristics.  These chips can include a star within a bulls eye, short crack, or long cracks stemming from the point of impact.  These are also eligible for repair providing the totality of the damage is not more than 2 inches.  Lastly, it is possible to obtain a surface pit in your windshield.  This is merely a small nick that appears in your windshield due to normal wear and tear.  This damage will not damage the inner, plastic layer and can be repaired if the area is at least 1/8 inch in diameter.

Understanding Windshield Cracks

A windshield crack measuring 6 inches or less is referred to as a short crack, whereas a long crack is more than 6 inches in length.  Any crack reaching to the edge of the windshield is dubbed an edge crack, while a crack that does not reach the edge is called a floater crack.  The final type of windshield crack, a stress crack, is developed from an edge with no recognizable point of impact.  Typically, all five types are eligible for repair if they do not exceed 12 inches.  This excludes stress or edge cracks that crossover more than one edge.

Don’t Let a Small Problem Become a Nightmare

It is easy to procrastinate on a repair but waiting could cause the crack to become worse.  Simple conditions such as a hot summer or cold winter day could exacerbate the crack.  Don’t put off or overlook this necessary repair or you could end up costing yourself extra money for a total windshield replacement when a simple windshield repair would’ve sufficed had it not been left go.

While not all chips and cracks will be eligible for repair, a large majority will.  It is possible to improve the appearance of the crack between 60 and 99 percent.  Appearance aside, a job done correctly will restore 100% of the strength of your windshield after completion.  Speak to a skilled windshield repair specialist to answer any questions or concerns regarding your windshield damage!

Read more…

Charlie's Guys is organized exclusively for children 18 years and younger across the country who have lost a sibling in any way.  Our mission is to remind children who have lost a brother or a sister that they are loved and not forgotten. We aim to provide these individuals with something special - a new experience or a gift - that meets their needs/wants. We hope to provide them with lasting, positive memory to help them throughout their grief journey. 

Charlie's Guys has provided children with special experiences to sporting events, limo rides, amusement parks, behind-the-scenes tours and more. Please fill out a referral form on our website if you know someone who would find this valuable.

www.charliesguys.org

instagram: @charliesguys

twitter: @charlieguys

facebook: Charlie's Guys

email: charliesguys@gmail.com

Read more…

On May 15 we celebrate the one year anniversary of launching Charlie's Guys. This organization was created through the strength of community. To honor the one year anniversary of its launch, we want to bring together our community. 

Leading up to our anniversary, we will feature stories from families affected by child and sibling loss. To participate, email us (charliesguys@gmail.com) your story along with a picture -OR- post your story and photo to your social media page, using the hashtags #lovedandnotforgotten #charliesguys #oneyearstronger 

Submit your stories by April 28 to be featured. To help us grow our community, share this information with others who want to share their story. 

We look forward to hearing your stories, seeing your loved ones, and sharing them with our community.

www.charliesguys.org

intagram: @charliesguys

twitter: @charlieguys

facebook: Charlie's Guys

email: charliesguys@gmail.com

Read more…

Charlie's Guys - The Story

The summer of 2017 was idyllic. We had everything they could have dreamed of - a happy marriage, a beautiful home in Boulder, Colorado, two adorable sons ages 3.5 and almost 2, and a daughter on the way. We had spent most of the summer poolside in Boulder and beach-bound in Newport Beach, California and Hawaii. Our boys loved to play transformers, and Charlie, our youngest son, would point to airplanes and helicopters in the sky shouting, “the guys!” - an endearing impression of the transformers slogan, “robots in disguise.”

But on August 11, 2017 everything changed for our family. That morning, despite everything seeming normal at 6am when we checked on the boys, Charlie, would never wake up. At 7am we found him lifeless. Despite administering CPR and calling 9-1-1, he would never come back.  He would never get to celebrate his 2nd birthday just one month later. He would never get to meet his baby sister, Victoria, who was born two months after his passing. He would never get to trick-or-treat with his brother as BumbleBee the transformer. We would never get to snuggle him ever again. It would be many months before we would discover that Charlie died from what was believed to be a virus that had no symptoms until it became fatal.

Following this tragedy, there was unspeakable grief, endless tears, and the deepest sadness. It’s true that no parent should have to outlive their children. It seemed impossible for us to get up every morning with insurmountable grief weighing them down. But with a baby on the way, and a surviving son, we had no choice but to brave each new day.

Community took on a new meaning for us after Charlie’s death. During the weeks after, while police investigations ensued and funeral arrangements were made, it was our family and friends who rallied around us to support however possible. Whether bringing us meals, planning play dates with Scottie, or driving me to doctor appointments, there was no act too small to show support. Family and friends from all parts of the country came to grieve with us. And the love and support extended beyond just us as parents. Charlie’s brother was invited to a special scrimmage of CU football team. Our family was honored on the field at one of the CU Buffaloes game. Memorials were created all over the town in honor of Charlie. Even our unborn daughter, was showered with gifts. Every day for nearly a year we received something special in the mail for someone in their family.

With the help of our community, we slowly began to regain strength. And we saw the incredible impact the community support had on our surviving son. Out of our tragedy, an idea was born. In May 2018, we founded Charlie’s Guys - a nonprofit organization aimed at providing experiences and gifts to bereaved siblings as a way to remind them that they are loved and not forgotten.

 

It’s been over a year since we lost Charlie, and the grieving and healing process is just that - a process. It will never end, it will never be something we conquer. It doesn’t get easier, but we do get stronger. Our desire to help the hurting has never been stronger. Grief is debilitating and if we can help bring a tiny bit of light into something so deafening and dark then we have not only made Charlie’s death purposeful, but we have also made our lives purposeful.

www.charliesguys.org

intagram: @charliesguys

twitter: @charlieguys

facebook: Charlie's Guys

email: charliesguys@gmail.com

Read more…

Loveland, Colorado—  Northern Colorado Manufacturing Partnership (NoCO) has announced the full slate of speakers for NOCOM 2019, its fifth annual conference at The Ranch on April 11, 2019. Sessions will address topics ranging from strategic partnerships to the talent pipeline. The NOCOM 2019 Speaker Hall is sponsored by AuerCPA Co. and FirstBank. All speakers will present in the South Hall.

“After in-depth research with Partnership members, we planned, solicited and selected this speaker slate carefully,” said Christina Haxton, Chief Potential Officer at The Center for Sustainable Strategies, who managed the process. “We worked to balance presentations about technology, the supply chain, and ongoing concerns manufacturers have around personnel, including hiring and workforce development. We have some great speakers presenting important, useful information that members and NOCOM attendees will find valuable.”

10:00-10:45 a.m. Manufacturing Workforce Solutions: Plan for today and the future!

Trevor Pruitt, Associate, Skillful - Colorado

Andrew Palmer, Advanced Manufacturing Program Manager at CareerWise Colorado

Practical, affordable strategies you need to fill your talent pipeline.

11:00-11:45 a.m. How to STOP the COP-OUT Syndrome & Build a Culture of Ownership in Your Organization: A 4-Part Framework for Manufacturers & Supply Chain Companies

Christina Haxton, Chief Potential Officer at The Center for Sustainable Strategies

Insights, strategies and best practices from interviews with executives and CEOs of successful Colorado companies who are building a Culture of Ownership.

1:30-2:00 p.m. Best Practices for Strategic Partnering to Increase Performance & Profit

Bob Forshay, APICS Northern Colorado

Dan Van Arsdall, Global Supply Chain Manager, Rubadue Wire

How to partner strategically and intentionally to deliver on time, on budget, and on promise.

2:00-2:45 p.m. Taking the Manufacturing Journey to Operational Excellence: Reports from the Field

Josh Owens, Sales Engineer at TMMI powered by GrayMatter

Mark Morse, Enterprise Sales Specialist at GrayMatter Systems

Advancing your operation through digital processes and predictive analytics to outperform – close the loop between manufacturing and business systems to get the most out of your operations.

Note: for full details on each session and bios and photos of each speaker, visit this link for a Google doc:

https://docs.google.com/document/d/1P2-426V-gBhn0LLayLuyMfKjJ1llQU4PJ18yI5u0vDo/edit?usp=sharing

 

“NOCOM is a unique opportunity to expand your business where it matters,” said Bob Forshay, Supply Chain Pro 2 Know. “Local leaders investing in their and your growth through collaboration and learning.  We all profit when we gain competitive advantage. My 30+ years in manufacturing and supply chain management has shown me the value of strategically leveraging your supply chain partners, add capabilities, flexible capacity and reducing the risk overall”.

 

“We hope folks come to us with questions, are open minded, and ready to learn,” said Dan Van Arsdall, Global Supply Chain Manager, Rubadue Wire. “Whether that’s from us, other speakers, exhibitors, fellow attendees. There are so many folks doing it differently from the status quo, and your best approach is to learn, network, collaborate and think strategically. You’ll find lots of ideas you can borrow and paraphrase and modify, and we’re all here to learn from one another.”

 

The NOCOM Student Experience

NOCOM 2019 is proud to host high school students for a NOCOM Student Experience where students will enjoy lunch with a speaker. From 1:00 to 2:00 p.m. they will walk the trade show floor and have an opportunity to talk with exhibitors about what their organizations offer the future workforce, including tuition reimbursement, internships, job shadows, and more.

 

“The NOCOM show is such great exposure for students,” said Josh Weissman, technology education teacher at Poudre High School in Fort Collins. “We can show them real opportunities in the community today. What engineers do in the real world. What assemblers do. What machinists make. They get lunch, and get a look at what 130 different companies are doing, in one stop, under one roof.”

 

About the 5th Annual NOCOM Trade Show

NOCOM 2019 takes place Thursday, April 11th, 2019, The Ranch Events Complex, in Loveland, Colorado. For more information or to register, visit www.nocomfg.com.

Date:   Thursday, April 11th, 2019

Time: 9:00 a.m. to 3:30 p.m.

B2B Networking Reception 4:00 to 6:00 p.m. (separate ticket required)

Featuring Colorado OEDIT Executive Director Betsy Markey

Embassy Suites Loveland

For more information and to register for this event, visit www.nocomfg.com. For more information on sponsorships and to become a corporate sponsor, contact Adam Papilion, NOCOM 2019 Chair, at 970-692-3344 or adam@h2manufacturingsolutions.com.

About Northern Colorado Manufacturing Partnership

The NoCo Manufacturing Partnership was formed in 2013 as a result of Governor Hickenlooper’s state Economic Development plan called the Colorado Blue Print. The Blue Print identified 11 key sectors of the economy in Colorado by region. Northern Colorado’s two main sectors identified were Health and Wellness and Advanced Manufacturing. Regions within the state were encouraged to form sector partnerships to provide more localized grass roots support to augment state efforts in each sector. These would be industry specific, led by business, in partnership with economic development, education and workforce development. A collaboration arose as part of the Blue Print process involving people from each of these affiliations and the NoCo Manufacturing Partnership was born. It continues to be an all-volunteer, business led, FREE membership organization designed to support Northern Colorado manufacturers. It is served by a Board of Directors, representing each affiliation from private business to local government, as well as two active committees: Networking and Manufacturing Talent/Rocks! Find us on the web, Facebook, Twitter and LinkedIn.

###

To view this release online, visit this Google doc link:

https://docs.google.com/document/d/1OAyv2PqWs2AuJka0l3HgBwlbgNhkaIfpKy5dMLx0Vmg/edit?usp=sharing

Read more…

Blog Topics by Tags

Monthly Archives