Blogs

dechen%20hawk%20promo%20pic.jpgJohn StatzPamela MachalaBOULDER IN-THE-ROUND SHOWCASES SINGER-SONGWRITERS At eTOWN HALL

 If you’re of a certain age in Boulder, chances are you don’t go out to hear live music much anymore, because you don’t want to go to a STO venue (that’s Standing Room Only) where the music doesn’t get started until 10 p.m.  And many don’t want to go to a show where the crowd is actually louder than the music on stage.  For that crowd—and any true lovers of original music—there’s now Boulder in-the-Round at eTown Hall on the first Wednesday evening of every month.

Boulder in-the-Round is a singer-songwriter showcase, featuring four different singer songwriters every month.  If you’re over 50, you’ll love the fact it starts at 7 p.m. and you’re out the door by 9:30 p.m. Not bad for a school night.  It beats another night on the sofa.  And what a showcase it is. 

Four artists take turns playing one of their original songs, often sharing the story behind it, not unlike the famed Bluebird in Nashville.  And while these local, regional and national artists haven’t had a song on the top 20 charts yet, once you hear them, you’ll know it’s just a matter of time before they DO chart.

Boulder in-the-Round was birthed by local singer-songwriters Theresa Peterson, Hunter Stone and Wilson Harwood, although Peterson and Stone are now the “curators.”

“We all met while doing various Open Mics around town, and started talking about putting a songwriter night together; some kind of roundtable platform,” said Peterson.  “We started at Hunter’s house, and then connected with the folks at Vapor Distillery in East Boulder, where we performed for two years. They were so supportive of what we were trying to do.”

Ultimately a friend connected Peterson with eTown Hall Facility Director John “Digger” Pelaez. eTown is the nationally syndicated radio show that features live performances and is hosted by Nick and Helen Forster.  The rest, as they say, is history. 

“eTown is the ideal venue for musical performances such as these,” said Peterson.  Every month eTown graciously provides the space, a sound engineer, volunteers and even bartenders. While Boulder in-the-Round currently takes place downstairs at eTown Hall, Peterson hopes to grow the monthly event into the big performance hall one day. 

If you haven’t had the chance to be in a true “listening” venue, you’ll want to download your free—yes, free—tickets to Boulder in-the-Round. The four singer songwriters that are performing on Wednesday, June 7 are diverse, as they always are. You’ll hear from Dechen Hawk, a Boulder songwriter with neo-soul style.  Heatherlyn is a nationally touring songstress offering pure, soaring vocals and songs that radiate love.  John Statz, who recently returned from an international tour and is releasing a new record in June, brings poignant lyrics and a classic folk sound. Pamela Machala delivers fun, smart and heartfelt indi pop. 

Peterson will be on hand as the evening’s “curator,” and a local artist is always on hand, painting to the inspiration of the music.  The artwork is usually for sale or raffled off.  While the tickets to Boulder in-the-Round are free, if you attend, you’ll need to fill the tip jar, as that’s how the artists get paid.  And after you experience the show, you’ll want to stuff that jar to the brim. The talent is that good, the listening room environment is that unique and the venue is ideal.  Plus, it’s not every day you look around a concert or performance of any kind that attracts a mix of 20 somethings, 30 somethings and even 60 and 70 somethings, all enjoying the same music in the exact same way—respectfully, quietly and appreciatively.

 “If you enjoy live music, if you appreciate hearing songs as they are born and the backstories behind them, if you appreciate artistry and value a true listening environment, you need to come experience Boulder in-the-Round,” said Peterson.

For free tickets, visit www.etown.org.  You can also check out Boulder-in-the Round on Facebook, YouTube and Instagram.

Test case integrates R&D, OEMs, contractors and subs to efficiently employ AM processes, expand markets and increase resiliency

Golden, CO –ADAPT, the Alliance for the Development of Additive Processing Technologies, a research consortium focused on developing technologies to accelerate the certification and qualification of 3D printed metal parts, in cooperation with the University of Utah, has received funding from the U.S. Department of Defense for the first phase of the Mountain West Advanced Manufacturer’s Network (MWAMN). From the approximately $2.7 million in funding, roughly $1.5 million will go to Colorado School of Mines and ADAPT.

“This program creates a new manufacturing platform to advance economic and workforce resilience in response to changes in defense spending,” said ADAPT Technical Director Aaron Stebner. “Enabling manufacturers to efficiently deploy additive manufacturing processes helps diversify their product offerings, expand into non-defense markets, and provide resilient employment and value to their communities and the economy independent of defense spending.”

The MWAMN leverages ADAPT’s existing data infrastructure built with funding from a State of Colorado Office of Economic Development and International Trade Advanced Industries Accelerator grant and funds from founding member companies. This data infrastructure will help inform product and material change-overs; create new innovations and diversification; accelerate product development; and reduce reliance on the defense industry while improving the ability respond to new Department of Defense requirements.

Other network members include Citrine Informatics; Carnegie Mellon’s NextManufacturing Center; and the NIST Manufacturing Extension Partnership organizations from Colorado and Utah, Manufacturer’s Edge and the MEP Center at The University of Utah.

“Additive manufacturing holds the promise of enabling manufacturers to quickly adapt to changing market needs compared to traditional manufacturing methods,” noted Heidi Hostetter, ADAPT industry board chair. “Today, building new parts or switching materials with this technology takes too long. MWAMN is focused on radically shortening that time, lowering costs, and reducing the negative economic impact on companies and communities when defense programs and spending changes.”

Together, members will network past, present, and future defense-supported metals manufacturers directly with advanced manufacturing research and development centers via a centralized, artificially intelligent database. This platform will enable defense manufacturing contractors to efficiently use AM processes to shorten product development cycles, expand product mix, enter new non-defense markets, increasing economic diversification of their businesses along with economic and workforce resilience.

About ADAPT

The Alliance for the Development of Additive Processing Technologies (ADAPT) is a research and development organization dedicated to the creation of next-generation data informatics and advanced characterization technologies for additive manufacturing technologies. ADAPT uses these tools to help industry and government qualify, standardize, assess, and optimize advanced manufacturing processes and parts. Several levels of membership to the ADAPT consortium are available. Founding industry members include Ball Aerospace & Technologies Corp., Faustson Tool, Lockheed Martin, Citrine Informatics. Grant funding from the Colorado Office of Economic Development & International Trade (OEDIT) was provided to Manufacturer’s Edge and The National Institute of Standards and Technology’s Hollings Manufacturing Extension Partnership. For more information, find ADAPT on the web, LinkedIn,Facebook, or Twitter.